AstroStart® RS-613 is the model I have installed on my 2001 Mitsubishi Diamante. I tried the troubleshooting steps found here: User's Manual but had no success.
Any ideas are welcome
Have you tried re-programming it?
Four different remote controls can be programmed for a given vehicle. If a fifth remote is added, the first remote is deleted. Note: When the first code learning command is sent, all the old codes are cleared out. Therefore if you want to add a new remote, all the old ones must be reprogrammed as well. One or more remote transmitters can be added. To do this, programming is accessed as follows: Open hood. Insert key in the ignition and turn to the RUN position. Apply the brakes once. You now have 10 seconds to turn the key from RUN to the STOP position 3 times. If this sequence is correctly carried out, the control module flashes parking lights (4 flashes). You may then proceed to the next step. Press any button on the new remote control. When access code of new remote control is memorized, the control module will confirm with flashing parking lights (1 flash). Repeat the above procedures for each remote control that has to be programmed (up to 4 remotes). Apply the brakes, parking lights flashes twice to indicate that the system is no longer into learning mode.
The Moderator that does not promote Moderation...
BigJ: is on the list to be added to the gaming platform vote.jalapen.io/coin/vote but WE NEED YOUR VOTE! Please take a minute and vote and don't forget to confirm the email so your vote counts and doesn't get removed. Go NET!!
Mar 31, 2018 6:33:51 GMT
netminer: What's happening with ? Still alive?!
Jan 26, 2020 19:39:58 GMT